Linear design by the 0 degree angle on the front pipe. 2-1 featuring an optional internal baffle along with 4 variations for the tip. (Slash, 90*, 45*, Straight). Constructed from hand TIG welded 304 stainless steel for an everlasting anti-rust/corrosion life. Internally ceramic coated for external heat control. *These are not very passenger friendly.*
Fiberglass Wrapped Internal Baffle: Depending on your preference in sound and tune, the baffle will reduce overall airflow and will tone down the exhaust a few decibels which you may or may not prefer. Your bike can gain maximum performance with either being straight pipe or baffled, it all depends on your tune.
O2 Bungs: If you have a 2007 and up Sportster, you will need O2 bungs. It's essential for proper air/fuel mixture from your ECM. (Unless you're running o2 eliminators)
Integrated Flange Kit: With our flange kit, you don't have to reuse your OEM flanges. That can be a nuisance because the OEM flanges are snap-ring equipped, requiring special tools and more time to install/remove the exhaust. This adds convenience and less fragile parts to your exhaust system thus, simplifying it all around.
•Mandrel bent 304 Stainless Steel.
•Internally ceramic coated for heat control.
•1.75" inches at flange, then tapers to a full 2".
•Fits 1986+ & up: Sportsters of all trims & models.
•Optional fibeglass internal bafffle.
•O2 Sensor bungs added for fuel injected Sportsters.
•Works with rear-sets, mid & forward controls.
•Tip choices from slash cut, straight, 45* turnout, 90* turnout.
•These are made-to-order, turn around time is 1 week for this specific set.
•Worldwide shipping available.