Complete Tank Lift & Coil + Key Relocation Kit for Harley-Davidson Sportster (1995–2022)
Ditch the clutter and expose your bike’s clean lines with the Complete Tank Lift & Coil-Key Relocation Kit for Harley-Davidson Sportsters. Designed to move your ignition coil to the left side of the engine, relocate the key switch behind the rear cylinder, and raise the gas tank for a tighter fit and sleeker look.
This all-in-one kit is compatible with both carbureted and fuel-injected models from 1995–2018+. It provides everything needed for a bolt-on installation—including tank risers, key and coil brackets, and custom spark plug wires available in 19 colors.
For carbureted '95–'03 bikes, no choke relocation is necessary—our bracket integrates with the stock setup. EFI models ('04–'06) come with a built-in choke relocation, and '07–'18+ models install just like shown in product photos.
Add risers to the rear tank tabs for additional clearance on older models (available separately on our Accessories page).
Specifications:
Coil relocation bracket
Key relocation bracket
Tank lift risers (front)
8mm spark plug wire set (choose from 19 colors)
Installation hardware and instructions
Spark Plug Wire Construction: Suppression cloth style with silicone insulation
Material: High-heat resistant components, black powder-coated brackets
Ignition Compatibility: Carb & EFI
Mount Type: Bolt-on
Ditch the clutter and expose your bike’s clean lines with the Complete Tank Lift & Coil-Key Relocation Kit for Harley-Davidson Sportsters. Designed to move your ignition coil to the left side of the engine, relocate the key switch behind the rear cylinder, and raise the gas tank for a tighter fit and sleeker look.
This all-in-one kit is compatible with both carbureted and fuel-injected models from 1995–2018+. It provides everything needed for a bolt-on installation—including tank risers, key and coil brackets, and custom spark plug wires available in 19 colors.
For carbureted '95–'03 bikes, no choke relocation is necessary—our bracket integrates with the stock setup. EFI models ('04–'06) come with a built-in choke relocation, and '07–'18+ models install just like shown in product photos.
Add risers to the rear tank tabs for additional clearance on older models (available separately on our Accessories page).
Specifications:
Coil relocation bracket
Key relocation bracket
Tank lift risers (front)
8mm spark plug wire set (choose from 19 colors)
Installation hardware and instructions
Spark Plug Wire Construction: Suppression cloth style with silicone insulation
Material: High-heat resistant components, black powder-coated brackets
Ignition Compatibility: Carb & EFI
Mount Type: Bolt-on
Ditch the clutter and expose your bike’s clean lines with the Complete Tank Lift & Coil-Key Relocation Kit for Harley-Davidson Sportsters. Designed to move your ignition coil to the left side of the engine, relocate the key switch behind the rear cylinder, and raise the gas tank for a tighter fit and sleeker look.
This all-in-one kit is compatible with both carbureted and fuel-injected models from 1995–2018+. It provides everything needed for a bolt-on installation—including tank risers, key and coil brackets, and custom spark plug wires available in 19 colors.
For carbureted '95–'03 bikes, no choke relocation is necessary—our bracket integrates with the stock setup. EFI models ('04–'06) come with a built-in choke relocation, and '07–'18+ models install just like shown in product photos.
Add risers to the rear tank tabs for additional clearance on older models (available separately on our Accessories page).
Specifications:
Coil relocation bracket
Key relocation bracket
Tank lift risers (front)
8mm spark plug wire set (choose from 19 colors)
Installation hardware and instructions
Spark Plug Wire Construction: Suppression cloth style with silicone insulation
Material: High-heat resistant components, black powder-coated brackets
Ignition Compatibility: Carb & EFI
Mount Type: Bolt-on
Fitment:
Fits Harley Sportsters from 1995–2018+
Works with Iron 883, Forty-Eight, Nightster, 1200 Custom, Seventy-Two
For ’95–’03 carbureted models, no choke relocation needed
’04–’06 EFI models include built-in choke relocation
’07–’18+ EFI models install as shown
Optional rear tank lift risers may be needed for tank clearance on pre-2003 models
Why Choose the Complete Tank Lift & Coil-Key Relocation Kit?
Transforms the look of your Sportster—clean, open frame
Relocates coil and key for easier access and maintenance
Tank lift allows wire tucking for a minimal aesthetic
Compatible across wide year range of Sportsters
Custom spark plug wires available in 19 color options
Designed in-house for precise fitment with no cutting required
Instructions included—DIY install ready
FAQs:
Q: Will this work on my carbureted 2002 Sportster?
A: Yes. It works with 1995–2003 carb models and does not require choke relocation.
Q: Do I need to cut or weld anything to install this kit?
A: No. It’s a fully bolt-on kit—no permanent modifications required.
Q: Does this kit include spark plug wires?
A: Yes. It comes with an 8mm suppression cloth spark plug wire set. You can choose from 19 available colors.
Q: Can I add a rear tank lift?
A: Yes. We offer optional rear tank lift risers separately under the Accessories category.
Q: What does the tank lift do?
A: It raises your tank to allow wire tucking for a cleaner look and better airflow.